In recent years, compared with traditional mechanical cutting, fiber laser cutting technology has higher cutting accuracy, lower roughness, higher material utilization and production efficiency. Especially in the field of fine cutting, laser cutting has traditional cutting technology. But in some special cases, the power and effect of the optical fiber laser cutting machine will be greatly reduced. What is the reason for this? Now, let's analyze the factors that affect the effect of fiber laser cutting machine!

Analysis of the reasons for the decline of laser cutting machine

1. The environment and conditions at the production site have a great impact on the power of the optical fiber laser cutting machine. For example, there is a lot of dust and smoke at the production site. Some users place paint near the optical fiber laser cutting machine, which will affect the cutting quality and cutting capacity of the optical fiber laser cutting machine.

2. The nozzle of the cutting head of the laser cutting machine is also very important. The nozzle of the cutting head is installed at the front end of the processing head to help control the auxiliary gas, protect the focusing lens, maintain a stable distance between the processing workpiece and the nozzle during the cutting process, and prevent splashes. Bounce during cutting. In actual use, when there are different axes between the nozzle and the laser output beam, in order to ensure effective cutting, problems such as too wide kerf, nozzle damage, and melting of the cutting section are avoided. Nozzle hole and laser beam need coaxial adjustment.

3. At the same time, the debugging of the effect balance point should also be in place. When cutting specific products, we usually need to debug the balance point of the best effect. Sometimes, if not properly controlled, the accuracy and quality of cutting may be very different.

4. The laser itself will have some problems. First, the stability of the optical path, because laser is strictly a loss product. Like our car engine, you don't know how to maintain it. The optical fiber laser cutting machine needs regular maintenance and maintenance of the external optical path of the laser generator. In fact, after the laser of the laser cutting machine works for a period of time, the power drop is inevitable. When the power drop affects the production, the laser and external optical path must be maintained. After maintenance, the cutting capacity will be restored to the factory level.

In fact, for laser cutting equipment, no matter how good the laser equipment is, there will be attenuation aging phenomenon, no matter whether the product is good or bad, there are certain defects. Therefore, when using the optical fiber laser cutting machine, pay more attention to maintenance, and fully understand the reasons for the attenuation of the optical fiber laser cutting machine. The above are some factors that affect the effect of the optical fiber laser cutting machine. I hope they can help you!