1、 Fix the cutting materials, and fix the materials to be cut on the workbench of the laser cutting machine

2、 Adjust the equipment parameters according to the material and thickness of the metal plate

3、 Select the appropriate lens and nozzle and check their integrity and cleanliness before starting the machine

4、 Adjust the focal length and adjust the cutting head to the appropriate focus position

5、 Check and adjust the nozzle centering

6、 Cutting head sensor calibration

7、 Select appropriate cutting gas and check whether it is in good condition

VIII Try to cut the material. After cutting the material, check whether the cutting end face is smooth, and check the cutting accuracy. If there is any error, please adjust the equipment parameters accordingly until it is proved to meet the requirements

9、 Prepare the workpiece drawing and make the corresponding layout, and import it into the equipment cutting system

10、 Adjust the position of the cutting head and start cutting

XI During the operation, the staff must be present and carefully observe the cutting. In case of emergency, press the emergency stop button to respond quickly

XII Check the cutting quality and accuracy of the first sample, pay attention to the size of auxiliary gas and gas pressure. If the gas is insufficient, it needs to be replaced in time.

The above laser cutting machine operation steps may be of great reference value to new users, but the specific operation of the laser cutting machine should be adjusted according to the actual situation. It is hoped that most users will buy machines, operate them, and use them to create more and greater value for their enterprises.v