When we use the optical fiber laser cutter to cut graphics, we always worry about the side line problem. We have to admit that the side line cutting is a technical work, and without experience, it will cause irreversible consequences. The optical fiber laser cutting machine has only one processing opportunity, and you are not allowed to modify it twice.

Now let's discuss this problem with you:

When we do graphic design, we always have to leave a certain margin for the picture, which is not a problem for the optical fiber laser cutting machine. The things processed by the optical fiber laser cutting machine do not need to be manually corrected. It can be said that the three-dimensional processing is really achieved, and there will be no more or less scratches.

The program compiled by the optical fiber laser cutting machine does not leave any manual correction, but is a three-dimensional processing program completely consistent with the theoretical trimming line, which is directly used for cutting products. It can ensure that the cutting process is always consistent with the actual trimming state, and there is no situation that cannot be reached by two-dimensional scribing. There is no manual intervention in the whole cutting process, which ensures that the products obtained from each processing are consistent with the digital analog from the source, thus reducing the trimming line that originally required several explorations to only 3 to 4 times.

When optical fiber laser cutting machine is used for metal processing, wire cutting has higher accuracy and can cut thick plates, but its disadvantage is that it is very slow. Sometimes it needs to use other methods to perforate and thread to cut, and the cutting size is also greatly limited. Laser cutting can drill and cut materials. The cutting speed is very fast, and the processing size range is much larger than wire cutting.

At present, laser cutting is widely used in the metal processing industry, with fast cutting speed and high accuracy. It has absolute advantages in cutting metal plates such as medium and thin plates, aluminum plates and stainless steels, which is also the reason why optical fiber laser cutting machines cannot be replaced. It is believed that with the increasing demand for laser cutting products, optical fiber laser cutting opportunities will become more popular.

There are many differences between the optical fiber laser cutting machine and other cutting methods. For the cutting of some metal parts, we can adopt the punching and shearing process, which is not only efficient, fast, but also low in cost. However, it requires specific molds and cutters to cut and can only punch and shear on the thinnest plate. The laser cutting of the optical fiber laser cutting machine is flexible compared with this cutting method, It can be used to cut workpieces of any shape at any time without using a mold. The punching and shearing process will be difficult or impossible to achieve, so it has not been widely used.

Flame cutting is also one of the commonly used cutting processes in the metal field, and the cutting thickness range is also very large, but compared with laser cutting, the cutting surface quality and accuracy are relatively poor, but the thick plate and processing range are larger than laser cutting, so fiber laser cutting machine is generally used for the more fine ones.

The optical fiber laser cutting machine is quite different from the common cutting process we know. This cutting technology is a little obvious. It is fast and low in cost, but its disadvantages are also obvious. There is no opportunity for secondary processing of optical fiber laser cutting machine! So it is reasonable for us to use fiber laser cutting if we have relatively fine or highly demanding work.