What should we do in the daily maintenance of the laser engraving machine? What are the precautions?

1. The continuous operation time of the laser engraving machine is less than 10 hours a day to ensure the cleanness of the cooling water and the normal operation of the water pump. The water-cooled spindle motor must not be short of water. Replace the cooling water regularly to prevent excessive water temperature.

2. After the laser engraving machine is used every time, pay attention to cleaning. Be sure to clean the dust on the platform and transmission system, and lubricate the transmission system (X.Y.Z three-axis) regularly (weekly).

3. If the laser engraving machine is not used for a long time, it should be refueled regularly (weekly) to ensure the flexibility of the transmission system.

4. The laser engraving machine shall clean the dust in the electrical cabinet regularly (depending on the use), and check whether the screws of the wiring terminals are loose, so as to ensure the safe and reliable use of the circuit.

5. The laser engraving machine shall regularly (according to the use) check whether the screws of various parts of the machine are loose.