The machine tool of the plate-tube integrated laser cutting machine is an important part of the laser cutting machine, which can be said to be the carrier, so the daily maintenance of the machine tool is also necessary. What are the daily maintenance of the maintenance personnel?

1. Clean the dirt and dust on the machine body, cutting head, sensor and other parts in time to keep the machine clean and comfortable;

2. Clean the inflammables such as gloves and rags in the machine tool in time to prevent fire during cutting;

3. Clean up the iron slag on the waste truck of the skip hopper in time to ensure that the cutting waste can fall down smoothly;

4. Before starting the machine every day, carefully check whether the working gas pressure and pressure reducing valve work normally to avoid insufficient air pressure affecting the cutting section quality;

5. Check whether the cooling water circulation of the two channels is normal to avoid affecting the cutting quality or even damaging the lens due to poor cooling of the optical lens;

6. Check whether there is leakage in the cooling water of the cutting head's air pipe connections, so as to ensure the normal supply of gas and cooling water;

7. Before cutting, check the protective lens and focus lens and clean them in time to ensure the cutting quality and the service life of the focus lens.

Details determine success or failure. These precautions are essential for the long-term and effective operation of the machine.