The birth of metal laser cutting machine is mainly to improve working efficiency and cutting accuracy. However, high efficiency and precision are far from what human operation can achieve.

For example, during the use of metal laser cutting machine, in order to obtain high-quality cuts, the height from the cutting nozzle to the surface of the workpiece to be cut must be basically consistent. Because of the high speed of the laser cutting machine, the operator can't see it with his eyes and adjust it by hand. The reaction speed is definitely not up to the standard. Especially when cutting thin plates, or the material surface has lines, the flatness is not high or the cutting and processing environment is limited, it is important to keep the cutting height stable.

In order to achieve this effect, we have come up with many ways. At present, the proven and reliable method is to install a capacitor height adjuster for the metal laser cutting machine.

The principle of capacitance height adjustment is that the capacitance between two plates is formed between the capacitance sensing ring and the steel plate to be cut, and the capacitance size is related to the distance between them.

In order to make up for the unstable height control problem when manually adjusting cutting, the metal laser cutting machine is equipped with an imported follow-up capacitor height adjuster. No matter how thick the plate is cut, the height can be kept consistent with the capacitor height adjustment servo cutting head.

The height of the laser cutting head needs to be adjusted and controlled. The distance between the cutting nozzle and the surface of the cutting workpiece is one of the main factors that determine the cutting quality and cutting speed. In addition to selecting the appropriate cutting nozzle model and air pressure parameters according to the cutting situation, the height between the cutting head and the steel plate needs to be increased or decreased according to the thickness of the cutting material, and the steel plate with different thickness uses different parameters. At the same time, the cutting nozzle should be adjusted to the corresponding height.

Because of these factors, in order to achieve higher accuracy and efficiency, we need to install a capacitor height adjuster, which has a positive effect on the metal laser cutter. I hope you will pay more attention to these issues and make the laser cutting machine develop better and faster.