How to adjust the laser cutting machine to make full use of its cutting effect? In fact, machines, like people, need constant maintenance. In this way, the equipment can be kept in good operating condition. There are many parts of laser cutting equipment, and the maintenance cycle of some parts is relatively short. Therefore, it usually needs someone to maintain it.

How to adjust the metal laser cutting machine:

Adjust the machine assembly to improve the cutting effect.

1. Guide rail installation:

When installing the slideways, keep them parallel. When the laser equipment leaves the factory, repeated debugging is required to ensure the cutting effect of each type of equipment. If the guide rails are not parallel, there will be resistance when the machine is running, and most of the objects being cut have serrated edges, so the Y axis guide rails must be parallel.

2. The installation position of the beam and coupling is not good: during the installation of the beam and coupling of the machine, if the screws are not locked, or the locking parts are inclined or loose, the cutting effect of the laser cutting machine will be affected.

How to adjust the cutting accuracy of the laser cutting machine?

Adjust laser parameters to improve cutting speed.

During the cutting process, we need to gradually adjust the machine parameters. Generally, if the machine is not adjusted properly, the cutting speed or speed or effect will be affected. How to achieve speed and effect is that we need to debug according to the customer's materials. When leaving the factory, all parameters of the laser cutting machine have been set, but they can be adjusted later according to the user's needs. In general, the following points should be noted when setting parameters:

1. Initial speed:

As the name implies, this setting is the starting speed of the machine. First, the faster the initial speed, the better. In fact, if the speed is too fast, it may cause the machine to shake very much at the beginning.

2. Acceleration:

Acceleration is the acceleration process from the initial speed of the production machine to the normal cutting. Similarly, there will be a deceleration process when you are ready to finish cutting. If the acceleration is too low, the cutting speed of the machine will be reduced.

Precise debugging method of laser cutting machine.

1. Adjust the light point of the focusing laser to the minimum, and the point shooting effect will be established, and the focus position will be determined by the size of the light spot effect. As long as we realize that the light spot of the laser is the smallest, then this position is the appropriate processing focal length to start processing.

2. In the first part of the laser cutting machine debugging, we can use some test papers and workpiece scraps to determine the accuracy of the focus position by shooting. When moving the height position and size of the upper and lower laser heads, the luminosity of the laser point will change. Adjust different positions for many times to find the minimum light spot position, so as to determine the proper position of the focal length and laser head. The workpiece processed by laser cutting machine has no burr, wrinkle and high precision, which is superior to plasma cutting. For many electromechanical manufacturing industries, CNC laser cutting systems can easily cut workpieces of different shapes and sizes, so they are generally more popular than stamping and molding processes; There is no need to repair the mold