Methods to reduce the use cost of metal laser cutting machine:

1. In normal operation, the metal laser cutting machine should be turned on and off as much as possible. If the metal laser cutter is not used, the laser can be turned off. In addition, when meeting the cutting requirements, the power should be reduced as much as possible to save power consumption.

2. The metal laser cutting machine shall be used in strict accordance with the operating rules. Metal laser cutting machine is a high-tech equipment. If it is not used properly, it will affect the whole machine system, leading to unstable cutting workpiece quality, seriously affecting the equipment quality, and it is not worth the loss.

3. The focusing lens of metal laser cutting machine shall be clean. The focusing lens is the only lens in contact with the treated surface. During the operation of the laser cutting machine, some metal slag and dust will be generated, which will attach to the focusing mirror. If it is not cleaned in time, its light transmittance will be lower, and its heat absorption will become stronger, which will affect the cutting accuracy, and even cause damage to the cutting lens. Cleaning the focusing lens in time can reduce unnecessary material waste and the cost of replacing the lens.

4. After working for a long time, all parts of the metal laser cutting machine will be worn, which will lead to instability of the equipment and affect the cutting accuracy. Therefore, equipment maintenance is also a way to extend the service life of the equipment and improve the cutting accuracy.

5. Nearly 80% of the use cost of the laser cutting machine comes from the gas consumption. As the main energy supply for laser cutting machine and CNC laser cutting machine, familiarity and understanding of the gas application principle of laser cutting machine will help to reduce the use cost of gas.

Effectively controlling the cost of the laser cutting machine can not only reduce the use cost of the metal laser cutting machine, but also extend the service life of the equipment and ensure the quality of the cutting equipment.