Laser marking machine has gradually become a popular industry, which is closer to people's life and has been widely used in various industries.

It is difficult to be in the hot summer every year, which also means that the days are long and the nights are short. Running the laser marking machine for a long time every day will inevitably lead to high temperature, which is not conducive to the work of the marking machine.

Today, we will analyze some matters that should be paid attention to when the laser marking machine is marking in a high temperature environment, so as to avoid the failure of the marking machine due to high temperature.

matters needing attention

one

If the temperature of the surrounding environment of the laser marking machine exceeds 30 degrees, the factory with good conditions can turn on the air conditioner, and the factory without air conditioner should try to ventilate.

two

When it rains or the laser marking machine is placed in the basement, a hygrometer must be used to measure the humidity near the marking machine. If the humidity is too high and the lens temperature of the marking machine is very low, it is easy to condensation, which seriously affects the normal operation of the laser machine. You can turn off the machine, heat the room to room temperature for indoor problems, or add desiccant around the light path of the marking machine.

three

The internal temperature of the whole equipment cannot be too high, which will affect the stable operation of the laser power supply. It is recommended that all fans in the laser marking machine chassis be turned on. If there are no fans, additional fans should be added.

four

The air cooled laser marking machine should always clean the dust on the fan and the optical holder.

five

For water-cooled laser marking machines, the water should be changed once a week (when often used), and the dust screen of the chiller should also be cleaned every day.

five

The laser marking machine shall not be operated continuously for a long time under high temperature to avoid excessive temperature. Intermittent marking can be properly carried out. After working for a period of time, turn off the equipment to allow the equipment to cool down naturally and be buffered. During this period, replace the circulating water with higher temperature, and then turn on the machine for marking, which is conducive to the efficiency of marking.

At present, many traditional industries are gradually combined with high-tech industries, which is also the trend of industry development. Laser marking machine, as a kind of popular automatic marking equipment, has been gradually developed.

If the laser temperature is too high, please do not use the device for the time being. You can also turn off all the power of the laser marking machine, rest for a few minutes, and then turn it on. At this time, it will resume normal work. If you keep reminding that the laser temperature is too high, please contact the buyer.