With the development of laser cutting technology, optical fiber laser cutting machine has been widely used. Like human beings, the machine will age in the process of long-term use, which will slow down the cutting speed and reduce the cutting accuracy, thus affecting the cutting performance. So how to delay the aging speed of laser cutting machine? Redsail Laser gives you the answer.

1. Parameter setting

The factory parameters of the optical fiber laser cutting machine are preset. Due to the variety of plates to be processed, the manufacturer is open to users about parameter adjustment, which is obtained through long-term application practice. When using the cutting equipment, if it is used beyond the standard for a long time (such as overspeed, long-term cutting of anti material), the laser power will gradually decline and even damage the laser. In addition, with the increase of the service life of the laser itself, the power will decrease slightly. The equipment needs to be used according to the factory parameters of the manufacturer to make the parameters suitable for the materials being processed, which can effectively extend the life of the cutting equipment.

2. Ensure a good use environment

The laser cutting machine has certain requirements for the use environment, including temperature, humidity, dust, etc. The temperature shall not be too high or too low. Too high temperature may cause crash or slow machine response. Too low temperature may cause air duct rupture, air leakage or breakage. Therefore, it is necessary to control the temperature of the laser cutting machine workshop to delay the aging of various parts of the machine. Humidity will also affect the working condition and aging degree of the machine. Excessive humidity will cause some parts of the machine to rust, affecting the service life.

The laser cutting machine will produce a large amount of metal dust in the working process. The dust attached to the equipment will accelerate the wear between various parts, thus affecting the cutting accuracy. Metal dust attached to the lens will reduce the transparency of the lens, greatly affecting the performance and efficiency of the laser cutting machine. Maintain the surrounding environment of the laser cutting machine to ensure the cutting quality. Clean the dust frequently to ensure the stable operation of the machine. Use compressed air and vacuum cleaner to remove the dust and dirt on the optical fiber laser cutting machine console, electrical cabinet and equipment surfaces every day, and close the electrical cabinet door to prevent dust. It is necessary to remove the dust cover of each shaft regularly, check whether the gear rack and guide rail are worn or have foreign matters, and clean and add oil in time. Avoid affecting the cutting accuracy and damaging the rack guide rail.

The above matters can ensure the long-term and stable operation of the optical fiber laser cutting machine and create value continuously.