How to improve the operation accuracy of the optical fiber cutting machine? The accuracy of this machine is very high in the process of operation. However, with the extension of the service time of the machine, some of the wearing parts may be seriously worn, which may lead to a decline in accuracy. Therefore, in order to improve the accuracy, it is necessary to regularly check the wearing parts and replace these parts, so as to ensure the accuracy of processing operations. Please note that for replacement of consumable parts, the original matching parts should be selected, and the parts with mismatched models should not be purchased for installation and use. In addition, there are many methods to improve the accuracy of the operation. Here is a brief introduction to these methods.

In order to improve the accuracy of the optical fiber cutting machine in the operation process, the design drawings must be continuously optimized, because this machine operates according to the requirements of the design drawings. If the accuracy of the drawings involved is not high, then the accuracy of the final cut can not meet the requirements, so the drawings need to be optimized and designed to meet the accuracy requirements of production. This kind of machine will have a certain working power. If the power is relatively small, but the cutting material is relatively thick, then the cutting accuracy will decline seriously. The way to improve the accuracy is to replace a machine with higher power or reduce the thickness of the cutting material. In addition, manual debugging can also improve the accuracy, especially in the trial run. Through debugging, the accuracy can meet the requirements, and then batch cutting can be carried out. Some workpieces themselves are not suitable for cutting with this machine. For example, fiber materials or paper materials will not be cut with this machine. Because this material has a poor ability to withstand high temperatures, it is likely to burn up once it contacts the laser, so there is no way to improve the accuracy of cutting these materials.

Here is a brief introduction to how to improve the accuracy of the optical fiber cutting machine. The accuracy of the machine itself can be debugged. Before the operation, professionals from the technical department should debug the accuracy. Only when the accuracy requirements are met can the machine be started. During the operation of the machine, the accuracy should be checked at any time. Once it is found that the accuracy of the cut parts cannot meet the requirements, It should be shut down immediately and then re debugged or inspected.