The metal laser cutting machine will not present too big problems in the process of operation. However, we need to maintain the equipment frequently and pay more attention to some details during the operation of the equipment. The metal laser cutting machine is stable only after maintenance.

Replacement of circulating water and cleaning of water tank: Make sure that the laser tube is filled with circulating water before machine operation. The quality and temperature of circulating water directly affect the service life of the laser tube. Therefore, the circulating water shall be replaced regularly and the water tank shall be cleaned. Once a week.

The fan in the machine will accumulate a lot of solid dust in the fan after being used for a long time, which will make the fan produce a lot of noise and is not conducive to exhaust and deodorization. When the suction of the fan is insufficient and the smoke is not smooth, the fan should be cleaned.

There will be some mirrors and focus mirrors on the machine. The laser is reflected and gathered by these lenses and then emitted from the laser hair. The lens is simply stained with dust or other pollutants, which may cause laser loss or lens damage. So clean the lenses every day.

Attention shall be paid to the cleaning: the lens shall be lightly scrubbed to avoid damaging the surface coating; The scrubbing process shall be handled with care to prevent falling; The concave surface must be downward when focusing the mirror device.

In order to ensure that the machine has a high processing accuracy, its guide rails and straight lines are required to have a high guidance accuracy and good motion stability. During the operation process of the equipment, because the processed parts will have a lot of corrosive dust and smoke during processing, many of these smoke and dust will accumulate on the surface of the guide rail and linear shaft for a long time, which has a great impact on the processing accuracy of the equipment, and will form corrosion spots on the surface of the linear shaft of the guide rail, shortening the service life of the equipment. Therefore, clean the machine guide rails every half month. Shut down the machine before cleaning.

After the movement system works for a period of time, the screws and couplings at the movement joints will become loose, which will affect the stability of the mechanical movement. Therefore, during the operation of the machine, it is necessary to observe whether there are abnormal noises or abnormal phenomena in the transmission parts, and timely consolidate and maintain the problems found. A machine should be used to consolidate the screws one by one after a period of time. The first consolidation should be about one month after the equipment is used.

The optical path system of the machine is jointly completed by the reflection of the reflector and the aggregation of the focusing mirror. In the optical path, the aggregation mirror does not have the problem of offset, but the three reflectors are fixed by the mechanical part, so the possibility of offset is high. Although the offset does not occur under normal circumstances, it is recommended that the user must check whether the optical path is normal before each operation.