In addition to the important startup and use process, the shutdown procedure of the optical fiber laser cutting machine cannot be ignored. The machine is not really shut down according to the correct method, which will have some impact on the use of the optical fiber laser cutting machine. How to shut down the fiber laser cutter correctly?

In the process of use, the use rules are also followed. However, after use, the shutdown of the optical fiber laser cutting machine should also follow the shutdown steps.

Turn the adjustment function power adjustment knob counterclockwise to low power. Turn off the electronic shutter switch - high-voltage startup switch - laser startup switch in turn.

After the turbine stops running, turn on the ManualBackfill button on the laser board. The ManualBackfill light is red, the ManualBackfill light is off, and the recharging is completed.

Turn off the power supply of the optical fiber laser cutter - the machine tool power supply - turn off the power supply of the water chiller, the air compressor and the cold dryer.

Turn off the laser working gases CO2, N2, He, and O2 in turn, and turn off the air compressor and the cold dryer. Clean and tidy up the site and CNC machine tools. Follow the correct steps when turning off the fiber laser cutter.