Any equipment will age after long-term use. As a high-tech product, high-power fiber laser cutting machine is no exception. Today, Chuyu Laser will tell you how to slow down the aging of the 8000w fiber laser cutting machine.

1. The external optical path of the laser generator should be regularly maintained and repaired.

In fact, after the laser generator works for a long time, the decrease of laser power is inevitable. When the power drop affects production, the laser generator and external optical path must be maintained. After maintenance, the cutting capacity will be restored to the factory level.

2. The slideway shall be cleaned frequently to remove dust and other sundries and ensure the normal operation of the machine.

The guide rail and motor shall be cleaned and lubricated frequently to make the machine have better operation position and more accurate cutting effect.

3. If the quality of compressed air (mainly oil filter, dryness and dust) is poor, the cutting quality and cutting ability of the laser machine will be affected.

4. Too high working temperature will lead to machine collapse and slow reaction, while too low temperature will lead to air pipe damage, which is easy to leak air. Therefore, one of the key factors to slow down machine aging is to control the working environment temperature.

The aging of optical fiber laser cutting machine is an irresistible trend. How to protect and delay the aging is a key issue. Users should maintain it regularly in their daily work