In daily production, no matter what industry you are in, as long as you use machinery and equipment, it will age and even break down after a long time of operation. Laser cutting machines are no exception as high-tech products.
In the market economy, all industries and enterprises are in the pursuit of production performance, but ignore the use of machinery and equipment, which leads to the aging and damage of equipment.
During the daily use of the laser, the laser cutting machine is prone to aging and damage, which should attract the attention of operators and customized laser cutting manufacturers in daily use.
So how to slow down the aging of the laser cutting machine? In fact, there are two reasons why the power of the laser cutting machine is reduced. It is very helpful to read and study carefully, which is very helpful for improving the service life of the laser cutting machine, and at the same time, it can also improve the production efficiency of the enterprise.
Regular inspection and maintenance of the external optical path of the laser generator. In fact, the power of the laser cutting machine will drop after a period of continuous use. In the case where power reduction affects production, it is necessary to maintain the laser and the external optical path. After the repair, the cutting capacity is restored to the factory level.
Second, the production environment and production conditions have a great influence on the power of the laser cutting machine. such as compressed air quality. The factory was filled with smoke and dust. Some users spray paint near the fiber laser cutting machine, which will affect the power of the laser cutting machine, resulting in a decrease in cutting quality and cutting ability.
So how to solve the above problems?
1 Clean the dust and dirt inside the laser cutting machine often, and vacuum it up, once every five days!
2. Check the steel belt once a week and tighten it. Otherwise, the operator may be injured. The iron sheet looks very small, but the damage is not small, the problem is very serious, you should pay attention.
4. Regularly clean the guide rails to remove dust and other sundries, so that the laser cutting machine can work normally.
5. Wipe off the rack frequently, add lubricating oil regularly and properly, and lubricate without debris. Reduce rack wear.
Leave a Comment