It is very important to use the laser cutting machine safely and correctly. The use safety is more important than Mount Tai. To avoid accidents, you need to pay special attention to and be familiar with the inducements and preventive measures of accidents caused by the laser cutting machine.

Incentives for accidents caused by laser cutting machine

1. Eye injury caused by cutting sparks;

2. Non professional personnel open the laser power enclosure, causing electric shock;

3. Accidents caused by failures and out of control of safety protection and operation control devices; 4. Improper maintenance of electrical components, disrepair, aging, line damage, poor insulation and grounding cause accidents;

5. Accidents caused by improper equipment operation, illegal operation, improper command, poor coordination and misoperation by non equipment operators;

6. Accidents caused by failing to wear labor protection articles as required;

7. The operation process is uncoordinated, and the placement and stacking of workpieces do not meet the safety requirements, causing accidents.

Safety precautions and requirements for laser cutting machine

1. The laser has adverse effects on the human body. During the operation, the weak parts of the body, such as eyes and exposed skin, should be protected. It is not suitable to directly look at the laser in the cutting process with eyes.

2. During operation, any part of the human body shall not be within the running track of the beam to avoid being bruised.

3. During operation, the circuit control cabinet of the laser, body and chiller shall not be opened to prevent the harm of high-voltage electricity to human body.

4. The laser cutting machine must be powered off before maintenance, and can be powered on for inspection after maintenance.

5. There shall be no combustibles or ignition sources near the cylinder stacking point.