Metal laser cutting machine is a professional equipment that uses laser technology to transform metal. Those who often use metal laser cutting machine should know that its effect is affected by many factors, such as ordinary temperature. Next, we will detail the influence of temperature on the service life of metal laser cutting machine from all aspects.

The influence of temperature on the service life of metal laser cutting machine:

Generally speaking, the key component of CNC is the CNC system, and its working environment is generally between - 5 ℃ and+70 ℃. In this temperature range, the influence of high temperature on metal laser cutting machine is less than that of low temperature. Too low temperature will lead to gas pipe and cable breakage, gas leakage, poor connection and other failures!

For the motor of metal laser cutting machine, the influence is very small. Since metal laser cutting machines rarely use liquid lubricating oil, there will be no freezing field. You can rest assured! In any case, if conditions permit, it must be ensured that the temperature in the workshop is higher than 0 ℃ and should not be too low. Working at low temperature for a long time is easy to cause excessive mechanical wear and premature aging replacement!

When a metal laser cutting machine is used, the temperature should not be too high, which will affect the controllability of the numerical control system, resulting in system collapse, slow response and other problems. Therefore, it is very necessary to use a metal laser cutting machine at an appropriate temperature.

Note: Please pay attention to the frosting of the laser machine. As the temperature of the water cooler is completely different from the ambient temperature, the laser and cutting head will frost, which will damage the equipment and lens. Please raise the temperature of the water cooler. If not, please contact after-sales service to ask how to adjust.

Influence of temperature on the service life of laser cutting machine

Remind you again about the temperature settings:

① Summer: low temperature 29, high temperature 30,

② Non summer: low temperature 25, high temperature 30,

If possible, it is recommended to set the air-conditioned room to 28 ℃ dehumidification.

No matter how powerful the machine is, it also needs to be maintained to protect its "love machine" and always keep it in the best state, so as to bring greater benefits to itself. In order to make the metal laser cutting machine play a normal role, it is very important to maintain an appropriate temperature, which will also extend the service life of the metal laser cutting machine. Therefore, operators must pay enough attention to this aspect.