When it comes to the maintenance of the laser cutting machine in summer, users of the equipment must be familiar. With the arrival of summer, the temperature rises and the air humidity is high, the maintenance of the laser cutting machine also needs to be paid attention to. But do you know the secret of the maintenance of the laser cutting machine in hot summer?

Water cooler cleaning

The water temperature in summer is set at about 26 ℃ for low temperature water and about 30 ℃ for normal temperature water. Replace distilled water or purified water every two weeks, and clean the water filter screen and water tank. Clean the air filter screen and condenser every one to two days.

Laser maintenance

In high temperature environment in summer, the laser should be equipped with an air conditioning room, and the air conditioning temperature should be set at 26 ℃ under dehumidification mode.

Oil tank level

Check the oil level of the oil pot every week. If the automatic lubrication system detects that the oil level is too low, it will automatically alarm. Please refill the oil to the highest level with Mobil 46 # lubricating oil.

Mechanical cleaning

When the equipment is powered off, clean the Y axis, X axis and Z axis guide rails and racks every week, and timely apply lubricating oil after cleaning.

Maintenance of distribution box

When the equipment is powered off, clean the dust in the distribution box with clean compressed air every week, check the line connection, and eliminate potential safety hazards in time.

IPC maintenance

Clean the industrial computer every six months, remove the fixing bolts, and remove the cover. You can clean the motion control card and memory module. Clean the dust in the chassis with clean compressed air, and then wipe the gold thumb key of the motion control card and memory module with a clean rag.

The laser equipment is well maintained, and there is no trouble in making money all year round! Have you learned so many dry goods maintenance skills? The above is about the maintenance of laser cutting machine in summer. I hope it will be helpful to users who are using laser equipment for processing.