Pay attention to these points when using the laser marking machine!

With the increasing use of laser cutting machines, some private customized Taobao stores have also added laser marking machines at home as DIY tools.

However, many people do not have a set of real safety rules in mind for the newly emerging technology products.

How is it safe to use laser cutting machine?

one

Formulate and comply with equipment operation procedures:

1) Formulate and strictly follow the operating procedures of the equipment.

2) Before starting the machine, check the safety facilities of the system, especially the switch of the shutter.

3) Maintain the machine in time.

two

The location of the laser cutting machine is managed as a hazardous area:

1) The area where the equipment is located shall be safely demarcated as a hazardous area, which shall be enclosed with a telescopic isolation belt, and the laser leaked outside the hazardous area shall be guaranteed to be below the Class I achievable emission limit.

2) When the laser cutting machine is working, no one is allowed to approach the danger area.

3) Warning signs shall be set up at the entrance and exit of the dangerous area,

The contents include:

·Invisible laser radiation

·Class IV laser products

·Laser cutting machine power

·No outsiders

·Pay attention to eye protection

three

It is strictly prohibited to stack flammable materials in the laser cutting machine processing area

It is strictly prohibited to stack inflammable articles such as paper, oil cloth, oil products, etc. near the laser cutting machine.

When oxygen is used as cutting auxiliary gas, the material surface shall be free of oil stain.

Otherwise, it is easy to cause fire.

four

The site must be equipped with fire extinguishers

The laser cutting machine shall be equipped with fire extinguishers and other fire protection devices. The operators shall understand the layout and master the use methods.

five

It is forbidden to open the laser hood during operation

It is forbidden to open the laser hood during the operation of the laser.

It is forbidden to open the protective door of the closed optical fiber laser cutting machine during the whole operation process.

six

It is strictly forbidden to operate after fatigue and drinking

The use of laser processing equipment, such as laser cutting machine, has a great risk, and if you are careless, it is very likely to cause injury.

Therefore, it is strictly prohibited to operate the laser cutting machine after fatigue and drinking.

seven

Key management

When leaving the laser cutting machine, the operator shall remove the switch key and laser key of the equipment control power supply to prevent misuse by other personnel.