With the popularization of optical fiber laser cutting machine, safe operation has become the most important thing for a large manufacturer to tell customers. How to use and safely operate the fiber laser cutter? What are the precautions for the use and operation of optical fiber laser cutting machine?

For the use and operation of optical fiber laser cutting machine, most people do not have a set of real safety rules. Today, Shandong Datu Laser will introduce the operation specifications of the optical fiber laser cutting machine:

1. Observe and carefully observe the operating instructions of optical fiber laser cutting machine.

2. Fire fighting facilities must be equipped. When using the optical fiber laser cutting machine, be sure to check whether the fire fighting facilities are in good condition.

3. It is suggested to delimit the area where the equipment is located as a dangerous area, close the area with a telescopic isolation belt, and set up warning signs.

4. It is forbidden to operate the laser cutting machine when tired or drunk.

5. Never look directly at the laser beam.

6. Do not open the laser cover during operation.

7. It is forbidden to wear metal articles for maintenance.

8. It is forbidden to output laser beam when there is no target.

9. This must be paid attention to. It is prohibited to stack flammable materials in the processing area.

10. It is forbidden to enter the dangerous area when the machine is working.

11. Keep the working area of the laser cutting machine ventilated, clean and well lit.

12. Operators of laser cutting machine shall wear goggles and protective clothing.

13. When the operator of the laser cutting machine leaves, he/she should remove the switch key and laser key of the equipment control power supply.

The above are the precautions for the use and operation of the optical fiber laser cutting machine by the big picture laser. I hope it will be helpful to you.

In addition, many metal materials need special treatment to maintain their integrity. For workpieces with high material requirements, this problem is very difficult. Many metal materials may exist. During the transportation of metal, the friction damage of raw materials should be minimized. The sales of many products are crucial to their own sales, and there are higher requirements for optical fiber laser cutting machine to cut metal, Only by selecting the appropriate manufacturer of optical fiber laser cutting machine, can we use the equipment with more confidence in the future.