What are the precautions for using optical fiber laser cutting machine? Because laser is a very dangerous thing, the correct use of optical fiber laser cutting machine is very important. Be sure to master the operating skills of the laser cutting machine and follow the instructions, and operate in strict accordance with the operating instructions of the laser cutting machine. Now let's share with you the correct use and prevention of optical fiber laser cutting machine.

1. Before use, check whether the power supply voltage is consistent with the rated voltage of the machine to avoid unnecessary damage.

2. Check whether the exhaust pipe is placed at the air outlet to avoid obstructing air convection.

3. Check the machine table for other foreign matters.

4. The personnel who operate the equipment must be trained by the laser cutting machine manufacturer before taking the post.

5. When processing materials, you must wear necessary protective equipment, such as protective glasses.

6. The laser irradiation and processing shall be refused until the processing materials are clear.

7. After the laser cutting machine is started, there must be full-time personnel present, and it is prohibited to leave without permission. If it is necessary to leave, the equipment should be shut down.

8. Fire extinguishers and other equipment shall be provided near the laser cutting machine.

9. In the process of processing, if abnormal conditions are found, the machine should be stopped immediately, and then special personnel should be appointed for inspection.

10. After use, the laser cutting machine must be cleaned in time to make adequate preparation for the next processing.

11. Regularly inspect laser tubes, auxiliary gases and other consumables.

12. When the laser cutting machine is working, pay attention to observe whether every detail of the machine tool is abnormal.

13. The laser is invisible light, which will cause serious damage to the eyes. It is strictly prohibited to look directly at the laser beam.

14. During the operation of the laser, it is forbidden to open the cover of the laser.

15. It is strictly prohibited to wear metal articles for operation, which may cause electric shock.

16. It is strictly prohibited to stack paper, oil and other flammable materials in the laser cutting machine processing area.