Common processing materials of optical fiber laser cutting machine

Stainless steel, carbon steel

Aluminum, copper and other materials,

Optical fiber laser cutting technology

Is accompanied by

With the development of the sheet metal processing industry,

To promote the progress of social production

It plays an important role.

Optical fiber laser cutting machine

There are many commonly used accessories,

Some are wearing and consumable parts, which are consumable parts,

General laser cutting machine manufacturer

When selling laser cutting machines

Some parts will be given away to the customer,

But if it is used for a long time,

The complimentary parts are not enough,

To ensure production efficiency,

They usually prepare a lot of accessories,

Ensure the normal operation of the optical fiber laser cutting machine,

In case of emergency.

So, what are the specific accessories?

I

Reflectors In a typical laser system,

There may be only one or two transmissive optics,

It is usually used as the output mirror of the laser cavity

And a focusing lens at the end.

On the other hand, in some other laser systems,

There may be five or more reflective lenses.

The reflective lens acts as the tail mirror and

The refracting mirror is used in the laser cavity,

And the beam steering in the beam transmission system.

II

Beam expander

It can change the laser beam diameter

And divergence angle.

III

Protective lenses Laser protective lenses

It is mainly used to prevent foreign matters from splashing,

Prevent splashes from damaging the lens,

Antireflective coating with high damage threshold on both sides

To reduce reflections.

(The general replacement time cycle of these lenses

About 3 months,

According to the actual processing).

IV

The copper nozzle can assist in rapid gas injection,

It can effectively prevent impurities such as melting stains from rebounding upward,

In turn, the focusing mirror can be protected.

At the same time, it can control the gas diffusion area and size,

This will affect the cutting quality of the laser cutting machine.

At the same time, the diameter of the nozzle

It will vary depending on the thickness of the material being cut.

The replacement cycle is about two months.

V

Ceramic ring Ceramic ring is an optical fiber laser cutting machine

Important components on the cutting head;

Its main function is

Transmission of electrical signals collected by the laser head nozzle,

Normal and stable operation of optical fiber laser cutting machine

It plays an important role.

We often encounter equipment downtime for no reason,

Laser head hitting the working face and other faults

In fact, the laser ceramic ring is defective

The electrical signal caused is unstable

Or loss

Therefore, the optical fiber laser cutting machine

Choose a high-quality laser ceramic ring

It is very important.