How does the quality of the laser head of the optical fiber laser cutting machine affect the cutting effect of the machine? In the metal laser cutting machine equipment, the laser head is an important position. The cutting speed of the machine, the effect of the finished product processing, etc. are all affected by the laser head nozzle. What kind of laser head is better?

The processing quality of the optical fiber laser cutting machine is good or bad from two aspects, one is the light spot, the other is the power. In fact, in a sense, the light spot is proportional to the power. The higher the quality of the light spot, the lower the power of the optical fiber cutting machine. In addition, the effect of the finished product will not be bad. The spot quality is poor. No matter how high its power is, the cutting speed is not fast. Then, what is a bad light spot? A bad light spot is usually hollow and eight shaped. This kind of light spot is a bad light spot. If such a laser head is used, even if the power of the fiber laser cutting machine is higher, the cutting speed will not be improved, and the finished product will not be good.

The quality of the laser head equipped on the optical fiber cutting machine is good or bad, which is also the main factor affecting the quality of the cutting seam of metal materials processed by the equipment. In general, what is required for product processing is that the size of the cut seam should meet the standard and be the same from top to bottom, so that the finished product can be beautiful. But in the process of metal cutting, the factor of laser tube head is more important, because the cut seam is cut by laser head and nozzle. The quality of laser head will affect the final processing effect of optical fiber laser cutting machine.