What are the processing thickness and influencing factors of different power optical fiber laser cutting machine?

What are the processing thickness and influencing factors of different power optical fiber laser cutting machine?

Optical fiber laser cutting machine can cut stainless steel, copper, aluminum, galvanized sheet, carbon steel, etc. The metal optical fiber laser engraving machine has the advantage of one-time forming without secondary processing. Optical fiber laser cutting machine has high technology content and good processing effect, so the price is also high. Optical fiber laser cutting machine is an indispensable numerical control processing equipment for advertising companies, sheet metal processing enterprises and chassis manufacturers.

Now let's talk about "cutting thickness of different power of optical fiber laser cutting machine":

Laser cutting machine sample

The optical fiber laser cutting machine can cut different thicknesses for different materials. Longtai technology prompts that enterprises must first find out the materials and the maximum thickness required by customers, and then select optical fiber cutting machines with different powers to prevent excess power performance or processing capacity failure!

Cutting thickness of optical fiber laser cutting machine with different power:

1. The maximum thickness of different materials cut by 500W laser cutting machine: the maximum thickness of carbon steel is 6mm; The maximum thickness of stainless steel is 3mm; The maximum thickness of aluminum plate is 2mm; The maximum thickness of copper plate is 2mm;

2. The maximum thickness of different materials cut by 1000W laser cutting machine: the maximum thickness of carbon steel is 10mm; The maximum thickness of stainless steel is 5mm; The maximum thickness of aluminum plate is 3mm; The maximum thickness of copper plate is 3mm;

3. The maximum thickness of 2000W laser cutting machine for different materials: the maximum thickness of carbon steel is 16mm; The maximum thickness of stainless steel is 8mm; The maximum thickness of aluminum plate is 5mm; The maximum thickness of copper plate is 5mm;

4. The maximum thickness of different materials cut by 3000W laser cutting machine: the maximum thickness of carbon steel is 20mm; The maximum thickness of stainless steel is 10mm; The maximum thickness of aluminum plate is 8mm; The maximum thickness of copper plate is 8mm;

5. 4500W laser cutting stainless steel is 20mm at most, but the quality of the cutting surface above 12mm is not guaranteed, and the cutting surface below 12mm is absolutely bright. The cutting capacity of 6000W will be better, but the price will be more than one million.

The cutting thickness of different power optical fiber laser cutting machine is basically finished. Longtai will talk about the factors that affect the cutting effect of optical fiber laser cutting machine:

1. Focus position

The focus of the laser cutting machine can be aligned, and the cutting accuracy and accuracy can meet the desired requirements.

2. Cutting speed

In fact, no matter what kind of material can make the cutting speed extremely consistent with the material, the cutting effect at this time is the best. Too fast or too slow will affect the laser cutting.

3. Thickness and roughness of materials

Laser cutting is most suitable for cutting thin plates. The best thickness is carbon steel less than 12mm and stainless steel less than 6mm. The quality of the processed products is significantly improved, and the efficiency is also guaranteed. If you cut material<1mm, the cut will be very smooth. The material surface roughness also determines the cutting quality. Generally, the smoother the material, the better the cutting quality.

4. Operating power and mode of laser equipment

It has been proved through research that the higher the power of the laser equipment is, the better the effect will be even if the same plate is cut. The mode of laser cutting and the material have a certain degree of fit, the higher the effect is, the better.

5. Auxiliary gas pressure and type

The higher the pressure of the auxiliary gas, the higher the purity of the gas, the less impurities the material will adhere to, and the cutting edge will become smoother and smoother. Generally speaking, oxygen cutting is the fastest, nitrogen cutting is the best, and the cost is low. The cutting effect varies with different gases.

Pay attention to the above points, we can improve the cutting quality of the optical fiber laser cutting machine, and ensure the best performance of the equipment!