Many people think that optical fiber laser cutting machine

It belongs to the category of cutting machine,

And imported lasers are used,

The cutting range should be wide,

The effect should be much better than other methods,

Actually, it is not,

There are also special types of cutting machines,

Cutting machine of each type

Both have their advantages and disadvantages,

Next, double drive optical fiber laser cutting machine

Briefly introduce the materials that cannot be cut:

01

The dual drive optical fiber laser cutting machine belongs to the processing category of the metal laser cutting machine, so it can only cut metal, not cloth, leather, stone and other non-metallic materials. The reason is simple. The wavelength range of the optical fiber laser cutting machine is not within the absorption range of the above materials, or the absorption is inappropriate, which can not achieve the ideal cutting effect. At present, the advantages of applying it to non-metallic cutting are not obvious, Of course, it does not rule out the possibility of future development needs in this regard;

02

The dual drive optical fiber laser cutter is not recommended to cut aluminum, copper and other rare metal materials for a long time, because these materials are high reflective materials (Note: high reflective materials have little to do with the smoothness of the cutting surface of the plate, mainly because the wavelength of the laser is not within the ideal absorption range of these materials, the absorption effect is not good, most of the energy is reflected back, and it is easy to damage the protective lens in front of the laser head), and the long-term use effect is not good, It will also increase the use of consumables;

03

The double drive optical fiber laser cutter changes the cutting thickness according to its power. The higher the power, the greater the cutting thickness, the thinner the metal material, and the faster the cutting speed. The optical fiber laser cutter has obvious advantages for cutting thin plates.