The optical fiber laser cutting machine has been used for a long time,

Or because in the process of normal use

If you don't pay attention, there will inevitably be some small faults,

For these faults

Maybe a lot of times

We all need to constantly understand,

If there is a fault in use,

It may affect a lot of work,

To ensure that the cause can be found out quickly,

I have summarized some for you today

Common faults of optical fiber laser cutting machine,

I hope it can help you master as soon as possible.

Optical fiber laser cutting machine

As a popular application device,

During use,

I often encounter some small faults,

In the face of these common failures,

How should the operator handle it!

Let's discuss these faults with you.

In the face of optical fiber laser cutting machine equipment

Sudden failure,

The operator should keep calm first,

Then analyze the fault,

The optical fiber laser cutting machine is stuck,

I stopped working indirectly,

I stopped working completely,

The first thing to do is to turn off the power,

Then check and watch,

For optical fiber laser cutting machine

There are many common faults,

If the laser head fails to emit light,

The size of the optical fiber laser cutting machine is not in the range,

Cutting surface of optical fiber laser cutting machine

Unsmooth and other phenomena,

Let's solve the problem.

When the optical fiber laser cutting machine is working,

Suddenly, no laser came out,

The primary response is whether the power cord is loose,

Then check whether the laser power supply is damaged,

Finally, check the laser.

When the size of laser cutting is different,

Need to check the laser equipment

Whether the settings in the fixed parameters are normal,

Whether the parameters on the computer are correct,

Whether the pulse number is normal, etc,

Finally, go to the drawing software settings.

When the optical fiber laser cutting machine cuts the workpiece surface

When it is rough,

Need to observe the cut material

Whether it is within the scope of the whole equipment,

If in,

Then it is necessary to adjust the focus of the optical fiber laser cutting machine,

Focus the light of the laser device more finely.

Can make the effect more obvious.