Autumn is a time of hard work, and it is also a good time for the processing and manufacturing industry in the industrial production field to improve production quality. Many industries will choose to add new equipment at this time. The laser cutting machine is the most valuable equipment in the metal processing industry. The laser cutting machine shall pay attention to the operating environment when cutting. If the working environment does not meet the requirements, first, the working efficiency of the laser cutting machine will be reduced, and second, the laser cutting machine will be damaged. Let's talk about the requirements of the laser cutting machine for the working environment:

Requirement 1: Ensure that the temperature of the laser cutting environment remains unchanged. As long as the temperature remains unchanged, the cutting accuracy and normal operation of the laser cutting machine can be guaranteed. In particular, it should be noted that the working temperature of the semiconductor equipment of the laser cutting machine should be kept within the appropriate temperature range. Generally speaking, the room temperature is generally lower than the working temperature of the laser cutting machine. When the temperature of the laser cutting machine is too high, the laser cutting machine is prone to failure. The laser cutting machine generally uses cooling water to cool the machine itself, so it is necessary to ensure that the working environment temperature is not less than 5 ℃, and the maximum temperature cannot reach 35 ℃.

Requirement II: The relative humidity of the cutting environment of the laser cutting machine shall be controlled within the appropriate range. When working in a high humidity environment, if the laser cutting machine suddenly stops working, the temperature difference between the laser cutting machine itself and the external environment is too large, the moisture in the air will form condensate droplets on the main board of the laser cutting machine, and the evaporation process of condensate droplets takes time. After a single startup, the circuit of the main board of the laser cutting machine will be short circuited, which will affect personal safety in serious cases.

Equipment 3. The laser cutting machine will produce some fine powder chips due to its long-time operation, which will be inhaled into the operator's body with air, causing damage to the human body. And the powder will also enter the laser cutting machine body with the air circulation, causing damage to the laser cutting machine. Therefore, the laser cutting machine must be regularly maintained.